Communicating without a mobile network: LoRa radio
Field: long-range radio, mesh networks, resilience
Period: since September 2026, study and design
Client: internal project, Lab 77 (R&D)
On a mountain worksite, on a farm or at a remote site, the phone often shows "no service". Teams make do with walkie-talkies, or do not communicate at all. I looked into a radio technology that carries written messages and alerts with no operator, no subscription and no internet: LoRa, as a mesh network. Here is what I learned while designing such a network, what it can do, and above all what it will never do.
Context
LoRa is a radio technique originally designed for sensors: sending very small amounts of data very far while using almost no power. Enthusiasts repurposed it to carry messages between people. Open source software now turns small, inexpensive radio devices into a network where every device relays the others' messages, hop by hop.
Problem
- No coverage: where the mobile network does not reach, a scattered team can neither coordinate nor raise the alarm.
- Heavy solutions: a satellite link per person is expensive, and a professional radio network requires a licence and infrastructure.
- Vague expectations: people quickly imagine "internet without an operator". That is not what this radio does, and it is the first thing to establish.
Solution
1. State up front what LoRa does not do
A LoRa network is not the internet. It carries short text, GPS positions and alerts: a few hundred bytes per message, at rates of around 1 to 20 kilobits per second. No photos, no voice, no web pages. For a message like "come over, the machine has broken down at the low point", it is perfect. For live chatting, it is slower than a walkie-talkie.
2. Choose the software
I compared three open source projects: Meshtastic, the most widespread, with the largest community; MeshCore, more recent, where only fixed repeaters relay messages, which holds up better as the network grows; and Reticulum, a true network stack, more powerful but more demanding. They use the same radio boards but do not talk to each other: one network, one protocol. My recommendation: start with Meshtastic to learn, and keep MeshCore for a planned network with relays on high ground.
3. Design the network in four layers
Users have a small radio device, paired over Bluetooth with their phone or standalone with a screen and keyboard. Solar relays, placed on a roof or a hilltop, provide the range. A gateway, a small computer connected both to a radio device and to the internet where it exists, carries messages out and in. The network has no centre: if a relay goes down, two nearby neighbours can still talk to each other.
4. Make the gateway the heart of the project
Many people know how to put up antennas. The value lies in the gateway: a message written on a device can come out in an ordinary messaging app at the office, and the reply can come back by radio. A special contact can pass a question to an assistant, which answers in three lines, as much as the radio lets through. And alerts flow down automatically to every device: weather, safety instructions, end of work.
Result
The project is at the study and design stage: the state of the art of the protocols, the architecture, the budget and the test plan are written. The hardware test bench, three devices and a gateway on a table, is the next step. The "offline knowledge" part that the gateway was meant to query has, for its part, progressed a lot: I tell that story in an article about a library and an AI that work without the internet.
What I take away
- Ranges, honestly: a device in a pocket, among buildings and trees, reaches 1 to 3 km; on open ground with line of sight, 5 to 10 km; between two fixed relays on high ground with proper antennas, 20 to 40 km is common.
- Elevation matters more than power: a relay well placed on high ground beats a more powerful transmitter at the bottom of a valley. LoRa passes poorly through a hill.
- The cost is modest: 25 to 90 dollars per device depending on the model, with no subscription; the relays run on solar power. A test kit of three devices costs a few hundred dollars.
- Not one device per person: the model that works is shared devices at fixed points and pocket devices for those on the move.
- Change the default key: private messages are end-to-end encrypted, but the common channel shipped by default uses a public key known to everyone. Create your own channel, with your own key.
- Check the regulations: these frequency bands are licence-free, but their value (868 or 915 MHz) and the permitted power depend on the country.
Going further
Does your business operate on poorly covered sites, or do you want an alert system that depends on no operator? I study with you what is realistic, from a simple messaging network to a gateway connected to your tools. See your tools and your data, or book a 20-minute discovery call.
Sources
- Meshtastic, Introduction, official documentation, accessed 15 November 2026.
- MeshCore, official repository, accessed 15 November 2026.
- Reticulum Network Stack, official site, accessed 15 November 2026.
- What is LoRa?, Semtech, accessed 15 November 2026.
- Photo: -stk / Wikimedia Commons (commons.wikimedia.org), licence CC BY-SA 4.0.
Tags: LoRa, mesh network, Meshtastic, MeshCore, off-grid communication, alerts, resilience, remote site